cat1
  • Injection Robot User Instruction-Installation Notes
    Injection Robot User Instruction-Installation Notes 2019-02-21
    Injection Robot User Instruction Installation Notes For the safety of the operator and the injection robot, the installation of any injection robot must follow the notes below strictly:      1. The wiring work of the injection robot must be done by a professional electrician.      2. Please confirm the power of the injection robot is off when you're working.      3. The robot must be installed on flame retardant metal and away from the combustible materials.      4. Be sure that the injection robot is well grounded.      5. A safety circuit is important in the prevention of a damage to the control system when there's something wrong with the power supply.      6. A thorough reading of the instruction is necessary before installing, wiring, operating and maintaining of the robot to ensure the safety .      7. The controller of the injection robot must be installed in a well ventilated cabinet to keep it away from the oil and dust. A fan is necessary to keep the temperature of the cabinet below 50℃.     8. The controller of the injection robot mustn't be installed near the disturbing source such as the relay, transfer etc. 
    view more
  • Injection Robot, Spoons 24 pcs Plastic Bag Auto-Packing, Get Quotation Now
    Injection Robot, Spoons 24 pcs Plastic Bag Auto-Packing, Get Quotation Now 2019-01-08
    Why it's Important to Have the Disposable Cutlery Auto-Packed? With its low production cost and throw away character, the disposable cutlery are warmly welcomed by the canteen business. For years, the disposable cutlery such as spoons, forks and knifes were always manually, why is it necessary now to introduce an automation system? What's the benefits of an automated disposable cutlery automation system? 1. Cost Saving: With the increasing labor cost, SWITEK 3 axis servo injection robot cutlery automation system will have the cutlery picking, collecting and plastic bag auto-packing done automatically. With SWITEK 3 axis servo injection robot cutlery automation system, each worker will be able to take care of 4-5 injection molding machine instead of 2-3 workers to take care of one injection molding machine. It'll help the cutlery producer to reduce the labor cost. 2. Food Safety: With the cutlery packed automatically, it will help to prevent the potential second hand pollution while have them packed manually to ensure the food safety. 3. Efficient: With SWITEK cutlery auto-packing system, the cycle time is around 8~10s and will be able to produce 3~4 bags of disposable cutlery per minutes without human interference. About The Picking & Placing Injection Robot Working in SWITEK Cutlery Plastic Bag Auto-packing System Model No: SW6712DS Payload: 8kg Cycle Time: 7s Recommended IMM: 350-650T Key Components: 1) Servo Motor: Panasonic 2) Slider: THK 3) Drag: Igus Function in This System:  1) Pick out the cutlery from the injection molding machine.  2) Separate the runner and the cutlery.  3) Have the cutlery well stacked on the collector.  The Line Graph of 3 Axis Servo Injection Robot SW6712DS The Specification of 3 Axis Servo Injection Robot SW6712DS MODEL SW6712DS-N Recommended IMM (Ton) 350-650 Traverse Stroke(mm) 1800 Vertical Stroke(mm) 1200 Crosswise Stroke(mm) 880 Traverse Drive 3Axial AC servo Take Out Time(Sec) 2 Dry Cycle Time(Sec) 8 Power(KVA)/(Phs) 3.5 Single Phs Working Pressure(kgf/cm^2) 5~7 Air Consumption(NL/cycle) 2 Max Load (kg) 8 Net Weight(kg) 440 Gross Weight(kg) / Size (L x W x H) mm 2500 x 1610 x 1920 About The Cutlery Transfer 3 Axis Servo Robot SW7110S Specification of High Speed Injection Robot SW7109S In This Cutlery Automation System MODEL SW7110S Recommended IMM (Ton) 50-350 Traverse Stroke(mm) 1400 Vertical Stroke(mm) 1000 Crosswise Stroke(mm) 450 Traverse Drive  3 Axial AC servo Take Out Time(Sec) 1.5 Dry Cycle Time(Sec) 3.3 Power(KVA)/(Phs) 3.9 Single Phase Working Pressure(kgf/cm^2) 5~7 Air Consumption(NL/cycle) 1.8 Max Load (kg) 5 Net Weight(kg) 402 Gross Weight(kg) / Size (L x W x H) mm 2000x1065x1820 The Function Units of SWITEK 3 Axis Servo Injection Robot Disposable Cutlery Auto-packing System 1. Injection Molding Machine: 350T High Speed Injection Moldi...
    view more
  • Injection Automation, Luckin Coffee Caps Injection Automation Solution, Get Quotation Now
    Injection Automation, Luckin Coffee Caps Injection Automation Solution, Get Quotation Now 2019-01-11
    About Luckin Coffee Luckin Coffee, a startup Coffee chain restaurant brand in China founded in 2017.  Focused on takeaway business, with its competitive price and enthusiastic SNS promotion, Luckin Coffee won the attention soon after the first Cafe opened in Oct. 2017. By the end of Oct. 2018, Luckin Coffee had opened more than 1400 Cafes in China. About Luckin Coffee Caps Injection Automation System To serve the take away coffee as tasty as the coffee served in the cafe, the designer of Luckin Coffee tried their best to make the container as humanized as possible. As a result, the struct of the caps is much more complex than other caps for beverage cups. It has a tap to block the steam hole to prevent the leakage during transportation. It will request the cap supplier to have the tag well pressed after injection which will reduce the packing efficiency. In this project, the injection automation system will have the caps pick out and then have the tags well pressed and than stacked for carton loading. The Configuration And Specification Of Switek Luckin Coffee Caps Injection Automation System 1. Injection Molding Machine: 358 T High speed injection molding machine. 2. Injection Robot: SW6610DSG 3. Mold: 8 Cavities coffee caps injection molding mold. 4. Cycle Time: 6.5 s The Function of Switek Lucking Coffee Caps Injection Automation System Pick the caps --> Have the caps well positioned --> Have the taps well pressed --> Have the caps well stacked. The Advantages of Switek Lucking Coffee Caps Injection Automation System 1. Productive: The daily productivity of this system will exceed 100,000 pcs of well pressed coffee caps automatically. Which will help to increase more than 20% of the productivity. 2. Laborsaving: Since the system will finish the work of picking, pressing and stacking automatically, it'll help to reduce about 2/3 of the man hour for the same yield. 3. Low Cost: With a 3 axis servo injection robot as the core automation unit is possible to help reduce around 20% of the system purchasing cost than other automation solution and is easy for maintenance. 4. Global Onsite Installation and Training Service: With more than 12 years' experience in injection automation, SWITEK has an experience team of after service who are experienced in providing global onsite installation and training service. Lifetime free online consulting service is available. The Details of the Core Injection Robot SW6610DSG for This  System The Line Graph of The Injection Robot SW6610DSG The Specification of 3 Axis Servo Injection Robot SW6610DSG MODEL SW6610DSG Recommended IMM (Ton) 50-350 Traverse Stroke(mm) 1700 Vertical Stroke(mm) 1000 Crosswise Stroke(mm) 700 Traverse Drive 3 Axial AC Servo Take Out Time(Sec) 0.8 Dry Cycle Time(Sec) 3.8 Power(KVA)/(Phs) 3.5 Working Pressure(kgf/cm^2) 5~7 Air Consumption(NL/cycle) 4.5 Max Load (kg) 2 Net Weight(kg) 270 Gross Weight(kg) / Size (L x W x H) mm 2300x1530x1560 The Production Video of Switek Lucki...
    view more
  • Injection Robot, 24 Cavities Folded Spoon Automation Solution, Get Quotation Now
    Injection Robot, 24 Cavities Folded Spoon Automation Solution, Get Quotation Now 2018-12-27
    Why Is To Have The Folded Disposable Spoons Single Packed In a Chain Folded spoon, which is usually put in the lids of a cup of ice cream or Yoghurt, is one of the most important disposable cutlery in cold drink industry. To have the folded spoon plastic bag sealed independently has below advantages:  1. Possible of mass production: As shown in the video, with a 3 axis servo injection robot to handle the picking and placing, the folded spoon auto-packing system can finish a cycle in about 9.3 second. Which means it can produce 8600 pcs of well packed folded spoons per hour. It's important for a cold drink producer in the summer which and promise a reliable supply ability.  2. Possible of be distributed automatically in an auto-production system: A chain-packed folded spoons are easy to be auto-distributed in an auto-production system. The feeding of the folded spoon would be efficient and economic, which is the key to help the producer reduce the production cost.  3. It's convenient for the store assistant to handle the folded spoons to the consumer: In case there's no spoons served with the ice cream or Yoghurt, a chain packed folded spoons are convenient for the assistant to hand over to the customer safely. The plastic is a perfect shield to prevent a potential hygiene risky.  The Detailed Specification Of The 3 Axis Servo Injection Robot In The Folded Spoon Automation System MODEL SW7110S Recommended IMM (Ton) 50-350 Traverse Stroke(mm) 1400 Vertical Stroke(mm) 1000 Crosswise Stroke(mm) 450 Traverse Drive  3 Axial AC servo Take Out Time(Sec) 1.5 Dry Cycle Time(Sec) 3.3 Power(KVA)/(Phs) 3.9 Single Phase Working Pressure(kgf/cm^2) 5~7 Air Consumption(NL/cycle) 1.8 Max Load (kg) 5 Net Weight(kg) 402 Gross Weight(kg) / Size (L x W x H) mm 2000x1065x1820 The Details Of The 24 Cavities Folded Spoons Automation System 1. Injection Molding Machine: 250T high speed injection molding machine.  2. Mold: 24 Cavities folded spoons injection mold.  3. Robot: SWITEK 3 axis servo injection robot SW7110S.  4. Packing system: SWITEK disposable spoons folding and packing system.  5. Cycle Time: 9.3s.  Tips of a Disposable Folded Spoons Automation System Purchasing 1. Have an ideal about the expected daily productivity of the folded spoon automation system. Provide the detailed information of your injection molding machine and the mold to the designer of the automation system if you have them available. If not, request SWITEK to provide you with a turn key folded spoon injection molding automation system so we can have the machines well tested before delivery.  2. As soon as the detailed specification of the automation system confirmed, you mustn't do any modification to the design. Because any "minor" change to the design means a start from scratch and maybe a disaster to th...
    view more
  • Injection Robot, 4 Cavities 90 mm Beverage Cup Lids Picking & Stacking, Get Quotation Now
    Injection Robot, 4 Cavities 90 mm Beverage Cup Lids Picking & Stacking, Get Quotation Now 2018-12-26
    A Brief Introduction Of Injection Robot 3 Cavities 90 mm Beverage Cup Lids Picking and Stacking Solution The lids with 90 mm diameter is a lid for most of the beverage cups. The huge market volume make it a highly competitive products in the market. The margin of the lids production would be decided by the efficiency of production. Although a 2 axis servo robot arm can also do the work of picking and stacking, but no doubt a 3 axis servo robot arm will do a much better work with a higher efficiency.  Details of the 3 Axis Servo Injection Robot SW7110S Specification of the 3 Axis Servo Injection Robot SW7110S MODEL SW7110S Recommended IMM (Ton) 50-350 Traverse Stroke(mm) 1400 Vertical Stroke(mm) 1000 Crosswise Stroke(mm) 450 Traverse Drive  3 Axial AC servo Take Out Time(Sec) 1.5 Dry Cycle Time(Sec) 3.3 Power(KVA)/(Phs) 3.9 Single Phase Working Pressure(kgf/cm^2) 5~7 Air Consumption(NL/cycle) 1.8 Max Load (kg) 5 Net Weight(kg) 402 Gross Weight(kg) / Size (L x W x H) mm 2000x1065x1820 Details of 90 mm Beverage Cup Lids 3 Axis Servo Injection Robot Automation System 1. Injection Molding Machine: 200T High Speed Injection Molding Machine.  2. Mold: 4 Cavities beverage cup lids with 90 mm diameter injection molding mold.  3. Injection Robot: SWITEK high speed 3 axis servo injection robot SW7110S.  4.  Cycle Time: 3.8 s The Advantages of to Have the Picking & Stacking of the Beverage Cup Lids Done By A 3 Axis Servo Robot Arm? 1. Efficient: A 3 axis servo Injection Robot is much more efficient than  a 2 axis servo one.  2. Easy Installation: The moving of the 3 axis of the 3 axis servo injection robot is controlled by the servo motor and is easy to control the moving distance of the arm with hand controller according to to working condition. But the cross stroke of a 2 axis servo injection robot is controlled by a cylinder and inconvenient to adjust the moving distance of the arm after the injection robot installed.  3. Easy Upgrading: It's easy to have the injection system upgraded to a much more complex automation system while a 2 axis servo injection robot could not.  The Video of the 4 Cavities Beverage Cup Lids With a Diameter of 90 mm 3 Axis Servo Injection Robot Automation System
    view more
first page 1 2 3 4 last page

a total of 4 pages

New Products
Contact Us

Nanwei Industrial District, Chashan Town

Tel : +86 769 82398229
Whatsapp : +8618665171961
Fax : +86 769 81859017
Email : sales@switek.biz
Skype : +8618665171961
Robot Inquiry
Send us the detailed information of your injection molding machine, mould and product to get an instant quotation.
welcome to switek
Send us the detailed information of your injection molding machine, mould and product to get an instant quotation.
   

online service

Home

Products

about

contact